Flute Player

Recently on flutenet, there was a thread weighing the pros vs cons of student nickel-plated flutes. One thing I didn't mention in my replies there was that the common practice of flutists these days to upgrade or change the original headjoint to a pro model (often by another brand), in *most* cases means a silver headjoint - not nickel. Silver head on nickel body? Not a good look, sorry.

I have three footjoints for my Haynes - B, C and D. Without a doubt, the response on the low end of the flute gets worse the longer the footjoint is. In other words, low notes like D, E and F sound more open and resonant to my ears with the D foot, less so with the C foot and less again with the B foot.

That is not to say that I don't use the B foot because I don't like the tubby response of the low end, I do use it and use it fairly often. That's because low B is a very useful note, especially in jazz (and some 20th century stuff) - even if I think the flute sounds and feels "wrong" the entire time I'm playing it...

And lively as the D foot is, unless I'm playing Mozart, the loss of having a low C and C# can be frustrating too. So the moral of the story is that I look at the musical situation first, then decide which footjoint is best for the job.

The plastic Yamaha YPC-32 body has the same sized headjoint tenon as the professional model wood Yamaha piccolos (YPC-62, YPC-81). This means that you can stick one of the pro wood headjoints on the YPC-32 without any modification and it will dramatically change the sound of the YPC-32, and for a fraction of the cost. However, in order to get one of the pro wood headjoints you'll need to special order it from a Yamaha dealer, so shop around to find the best price.

The wood flute has been making something of a comeback in recent years with many top brands, Powell, Sankyo, Yamaha (just to name a few) offering them as part of their product line. However, these flutes are not cheap ($6,000 - $11,000 +). In response to the cost, what invariably happens for many flutists wanting a wood flute - but not wanting to pay modern prices - is that they start shopping for used instruments and therein lies a problem.

Why? Because most of the old wood flutes floating around on the used market are either low-pitched to A-435 (Haynes for example) and/or in the key of Db. While the relatively low prices for these old flutes at first appear as bargain (even with the costs of a full overhaul factored in!), the problems of scale, pitch and tubby headjoint design, quickly take their toll on players used to modern metal instruments. One of the exceptions to the above are *some* old Rudall-Carte wood flutes pitched at A-439/440 which, because of their pitch, can be played reasonably well in modern ensembles.

Unfortunately for bargain hunters, the word is out on the old Rudall-Carte wood flutes at modern pitch with many flutists, dealers and collectors all looking everywhere for them. Consequently prices have risen for these flutes, and risen dramatically. Be advised too that there are plenty of Rudall-Cartes on the market that are not anywhere near modern pitch - stay clear of these flutes unless you plan to play solo most of the time.

Be aware that gold flutes are 14K gold (not 24K). 14K is commonly called "rose gold" and is closer in color to copper than the yellow 24K. If you know of any firm in the USA that does "rose gold" plating, please post the info here. Thanks.

This is a VERY common question for flute players and one I've been asked personally many times over the years. I used to think flautist was correct (or at least sounded hipper), but actually, flutist makes more sense. Why? Because flautist probably comes from the Italian "flautista" and since my language is English (American to be precise...), it's flutist.